191203
W
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
T0572
WARNING: Turn off the main power at circuit breaker before installing fixture.
AVERTISSEMENT: Coupez la source d’alimentation principale au panneau
central de disjoncteurs avant d’installer le luminaire.
Installation steps
1. Thread two headless screws (E) through the cross bar (A), and then secure them with four lock nuts (F) (two on each
side of the cross bar (A).) Adjust the length of the headless screws (E) if necessary.
Note: Make sure the headless screws are lined up horizontally to make the fixture level.
2. Attach the
cross bar (A) to the outlet box by using two mounting screws (B).
Turn off the power at fuse or circuit box.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ
AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
Green Grounding Screw (D)
Headless screw (E)
Mounting Screw (B)
Wire Connector (C)
Lock Nut (F)
Bolt Nut (G)
Rubber Pad (H)
Cross Bar (A)
Wire Connector (C)
House Grounding Wire
Outlet Box
Mounting Screw (B)
Green Grounding Screw (D)
Headless Screw (E)
Cross Bar (A)
Lock Nut (F)
Fixture Grounding Wire
Fixture Wire
Backplate
Photocell
Bolt Nut (G)
Rubber Pad (H)
Max.60W Type A Bulb
(not included)
Fixture
Socket
Shade
Socket Ring