Backstay
Brace Bolt
Crossbar
Bolts
Drill
3/16” Hole
3/16” X 1”
Spring Pin
NZ182 Rev. 07/17/17
12. If plumb of uprights was not acceptable, loosen, but do not remove all four crossbar bolts and two backstay bolts.
Adjust plumb of uprights.
13. While keeping uprights plumb, drill a 3/16” hole through back of crossbar and corner sleeve. Install spring pin into
hole, leaving 1/8” - 1/4” of pin protruding out.
***CAUTION***
This goal has been designed to be used for the game of football or soccer only. Goal posts must be anchored AT ALL
TIMES and shall be secured against overturning. Do not climb on the net or goal framework at any time! All
fastenings must be checked to insure they are fully tightened before and after each use of this product. Goal posts
not in use must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable
Soccer Goal Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use.
Do not use this equipment during the threat of high winds. Goal posts should be checked for safety before and after
each use. All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
