KWAD Green Energy ECO 10, User And Service Manual

Page: 15 / 58

- 13 -
**Above operations, you could press button to save the setting and
quick-exit the program. **
(8) How to check the parameters?
Press button ,then press to check the parameter of B - C - D - E-
F- G - H .
Code Parameter Range
B Water in temperature
-9 to 99
℃
C Water out Temperature
-9 to 99
℃
D Heating pipe temperature -29 to 99
℃
E Gas return temperature -29 to 99
℃
F Ambient temperature -29 to 99
℃
G Cooling pipe temperature -9 to 99
℃
H Actual steps of Electronic expansion valve N*5
** ATTENTION **
When you press and press button to enter into parameter
checking , the button could not be operated.
At the same as above ,when you press and press button to check
TIME - starting time of TIMER and Stopping time of TIMER ,the could
be not operated.
5. Parameter setting
This part should be operated only by qualified technicians for
after-service or maintenance.