KVM-TEC Matrixline 2000 Fiber, User Manual, Page: 7 / 28

12 | kvm-tec
1. introduction
kvm-tec | 13
2. INstallatIoN of thE EXtENdER
1.5 aboUt thE statUs lEd
The Status LED (8/15) can light red, orange or green. Table 1 shows the meaning of each colour.
Also see chapter
Troubleshooting .
Normal operation
* MX only ** Rem. Only
Meaning of LED indicators
colour blinking Physical
link
active
connection Video
Extended Usb
Initialisation Usb data
Received Identify
command autoupdate
Mode
Red - Yes No No Update Failed
Red Slow No No No
Orange - Yes Yes No
Orange Fast Update in Progress
Green - Yes Yes Yes Update Succedded
Green V. fast Yes**
Red/Green V. fast Yes
Yellow - No
Yellow Slow Yes
Green - Yes
Green V. fast Yes
Main lEd
RJ45 socket lEds *
2.1 UNPacKING aNd chEcKING thE coNtENts
Before using the product for the first time it should be checked for damage. In case of
damage due to transport inform the carrier immediately. Before delivery the product is
checked for its function and its operating safety.
• Make sure that the packaging contains the following content:
1x MX 2000/local extender/CPU
1x MX 2000/remote extender/CON
local /cPU Unit
1 x wall power supply unit l 12V 1A (EU-plug or INT plug)
1 x DVI - DVI cable 1,8m/5.9ft
1 x USB cable 1,8m/5.9ft
4 x mounting pads
REMotE/coN Unit
1 x wall power supply unit l 12V 1A (EU-plug or INT plug)
4 x mounting pads
MX 2000 fiber sfP Module pro unit
1 x SFP Modul-Multimode module up to 500m/1640 ft
(alternativ with Single-Mode up to 20km/12 mi ItemNr 6855)