Start up
6
www.kvm-tec.com
4
Start up
Switch on all devices. Both Extender units will start an automated initialisation
process, signified by a blinking red status light, this may take a few seconds.
When the status light turns green, all signals will be transmitted.
4.1
Status Overview
The Status Overview (Fig. 1)
provides the user with the most
important information about the
status of the extender in a single
screen.
This
will
appear
automatically whenever no video
is been transmitted, but can also
be opened manually via the OSD
menu (see
item 0
). Of particular
interest is the row at the bottom,
showing the status of four subsystems as being either active (green) or inactive
(red).
Connected to
<untitled>
DDC Opt
remote monitor
Video Mode
DVI
Resolution
1920x1080
USB Status
High Speed
Options:
Mem Switch
Rem FW Ver
4267
Local FW Ver
4267
[
Link
] [
Conn
] [
Video
] [
USB
]
Fig. 1