Multicast
29
www.kvm-tec.com
8
Multicast
8.1
Video Sharing
When the Video Sharing Mode is enabled, users can share their screen with
other users on the network.
What happens with the control over the local extender depends on the initial
state.
There are two main use-cases which can both be controlled in the "MASTER
VIEW connections overview" menu - which can be reached with the key
combination Ctrl-Alt-F10.
1.
A user needs his/her screen to be mirrored to other consoles:
This can be done by opening "MASTER VIEW connections overview" and
pressing "P" over the console that should display the user's screen.
In this case "P" stands for "push to screen". Such a command is only valid if
the console which initiates the mirroring is currently connected to a local
extender and has video.
2.
A user needs to see the screen of other consoles on the network:
This is done by opening "MASTER VIEW connections overview" and pressing
"G" over the console that should display the user's screen.
The key "G" stands for "get screen". If the console extender from which this
command is executed currently has a partner, a disconnect is executed
before the video of the other local extender is displayed.
If the selected local extender currently isn't connected, a connection including
USB, etc. is established.
“D” disconect
For help press "Strg+H"