40 | kvm-tec
kvm-tec | 41
3. extender menu/settings
3. extender menu/settings
3.9.5 ShoW ThE lAST RECEIVED IMAGE
With the function „show the last image“ the last received image can be used instead of a black
screen, if the remote Extender (COn) is not being used by the local
Extender (CPU) are separated. To show that this is the last received picture
the frame of the image flashes red.
Activate or deactivate the „Show last Image“ function. 1:
1. In the
Extender Settings
menu, press the
R
button. The
Remote Settings menu
becomes
Press S to activate or deactivate the function.
2. press
S
to activate or deactivate the function.
3. press
ESC
to return to the main menu.
local Unit Pinout (DCE):
Pin
Function
Direction
2
TxD
OUT
3
RxD
In
4
DTR
In
5
GnD
—
8
CTS
OUT
The pin numbers refer to a 9-pin D-sub plug.
The baud rate can be set in the menu. There is a universal setting for baud rates up to 9600
which transmits all different RS232 configurations transparently. for higher baud rates the
following settings are available via the menu:
baudrate
Parity Stopbits
4800
no
1
9600
Odd
2
19200
Even
38400
Mark
57600
Space
115200
230400
To set the baud rate:
1. From the
Extender Settings
menu, press the
R
key. The
Remote Settings
menu appears.
2. Press the
R
key. The
baud Rate
menu
appears.
3. To select a baud rate press the applicable
key. The
Enter Parity
menu opens.
4. To select a parity rate press the applicable
key.
Remote Unit Pinout (DTE):
Pin
Function
Direction
2
RxD
In
3
TxD
OUT
4
DTR
OUT
5
GnD
—
8
CTS
In
3.9.4 SETTING ThE bAUD RATE
