20 | kvm-tec
kvm-tec | 21
Misprints, errors and technical changes reserved
Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
2.2 QUICKINSTALLATION SMARTFLEX SINGLE
2. INSTALLATION OF THE EXTENDER
1. Power plug
12V 1A
1. Power plug
12V 1A
2. USB to PC
4. DVI in from PC
4. DVI to Monitor
2. USB from Keyboard and mouse
3. Network cable CAT5e/6/7/ up to 150m/492ft
4. DVI out to Monitor
Quick Installation SMARTflex Single
local / CPU – remote / CON
1.
Connect the CON / Remote and the CPU / Local Unit to the included 12V 1A power
supply.
2.
Now connect the USB cable to a USB port on your PC and connect the other end
of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON
/ Remote Unit.
3.
Connect the CPU / Local and the CON / Remote Unit with a network cable.
4.
Now connect the DVI cable to the DVI socket of the PC and the other end to the
DVI socket of the CPU / Local Unit (PC-in). Then connect the monitor with the DVI
cable to the CON / Remote Unit.
5.
Using a switch: Connect all endpoints to the switch. Ensure that all connections
have a bandwith of 1Gbit/sec. For video sharing the network has to support IGMP
snooping.
2.3 QUICKINSTALLATION SMARTFLEX DUAL
1. Power plug
12V 1A
1. Power plug
12V 1A
2. USB to PC
4. DVI in 1 from PC
5. DVI in 2 from PC
4. DVI to Monitor 1
5. DVI to Monitor 2
2. USB from Keyboard and mouse
3. Network cable CAT5e/6/7/ up to 150m / 492ft
3. Network cable CAT5e/6/7/ up to 150m / 492ft main link
Quick Installation SMARTflex Dual
local / CPU – remote / CON
1.
Connect the CON / Remote and the CPU / Local Unit to the included 12V 1A
power supply.
2.
Now connect the USB cable to a USB port on your PC and connect the other
end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse
to the CON / Remote Unit.
3.
Connect the CPU / Local and the CON / Remote Unit with the network cable.
4.
Now connect the DVI cable to the DVI socket of the PC and the other end to
the DVI socket of the CPU / Local Unit (PC-in 1).
5.
Now connect the cable to the DVI socket of the PC and the other end to the
DVI socket of the CPU / Local Unit (PC-in 2). Then connect the monitor with
the DVI cable to the CON / Remote Unit.
6.
Using a switch: Connect all endpoints to the switch. Ensure that all connec
-
tions have a bandwith of 1Gbit/sec. For video sharing the network has to
support IGMP snooping.
