KVM-TEC PROVX1(-F) Ver. 1.0 Long
kvm-tec electronic gmbh – 2522 Oberwaltersdorf – Kulturstrasse 1 – Austria
Tel + Fax +43-2253 / 81912 – Mobil +43-650 81912 02 – Email
- 3-
www.kvm-tec.com
3.1
Plug in/unplug the CATx cable
The Masterline MVX CATx Extender is delivered with an RJ45 socket.
Plug the CATx cable with the corresponding RJ45 plug (see section 7
requirements for CATx cable) into the RJ45 socket. Check that the plug is
latched in place to prevent faults.
To remove the CATx cable press the latch down and slowly pull the cable
out.
3.2
Plug in/unplug the LWL cable
The Masterline MVX Fibre Extender is delivered with a multimode SFP
module as standard. If a different SFP module is used, remove the black
dust protector from the SFP module and pull the metal latch of the module
forwards until it’s at a right angle, then the SFP module may be removed.
To plug in the new SFP module into the extender follow the same steps in
reverse.
To connect the fibre cable check that dust protector has been removed
and slot the fibre cable in until latch has clicked in to place. To remove the
fibre cable press on the latch and slowly remove the cable.
