44 | kvm-tec
kvm-tec | 45
3. EXTENDER sETTiNgs
3. EXTENDER sETTiNgs
As soon as a connection to the partner has been established, the test can be started with the
„Enter“ key or the arrow key on the right „
→“
.
After a valid synchronization process, the test is started and the test run time and errors are
displayed.
The test can be ended at any time by pressing the “Enter” or “
→
” key. If no error has occurred,
the status reports: “Test OK! If errors occurred during the test, the status displays the sum of all
errors that occurred.
3.5 ddc MenU
The DDC Information menu allows the user to specify which DDC information is used by the PC.
Definition of the DDC information used by the PC:
1. make sure that the main menu is open.
Press the O button and the DDC option menu will be displayed.
- Press 0 to display the DDC information of the monitor connected to the remote (CON)
Extender is connected.
- Press 2 to save the current DDC information. The system will
applies the same settings after restarting the Extender
- Press the keys 4 to 8 to use a predefined resolution, which
is saved.
3. press ESC to return to the main menu
Summary of Contents for 6012
Page 45: ...88 kvm tec 11 Notes ...
