KVM Discovery AS-7100 Series, User Manual

Page: 21 / 25

21
OSD OPERATION
OSD OVERVIEW
The On Screen Display (OSD) is used to handle all computer control and switching procedures. All
procedures start from the OSD main menu. To pop up the main menu, tap the [Ctrl] twice.
If OSD menu is set as “console locked”, you must input password each time the main menu appears.
If no password has been set, just press [Enter] to show main menu.
Note: There are two passwords in OSD. One is user password which is initially empty. And the
other is supervisor password which is “admin”.
OSD menu interface is shown as below:
Note: OSD always starts in List View, with the highlight bar at the same position it was in the last
time it was closed.
OSD NAVIGATION
To dismiss OSD, press [Esc].
To move up and down through the list one line at a time, use the Up and Down Arrow Keys. If there
are more list entries than what can appear on the main screen, the screen will scroll.
To activate a port, move the highlight bar to it then press [Enter].
After selecting a port, the OSD menu automatically disappear and a blue tip window appears to
indicate the port currently selected.