KVM Discovery AS-7100 Series, User Manual

Page: 19 / 25

19
SINGLE STAGE INSTALLATION
To set up your installation, do the following:
1. Plug your USB / PS/2 keyboard, USB / PS/2 mouse and monitor into the console port
section located on the unit’s rear panel.
2. Using a KVM cable set, plug the DB 15 connector into any available CPU port on the
switch.
3. At the other end of the cable, plug the keyboard, mouse, video cables into their
respective ports on the computer.
4. Plug the power adapter cable into the switch’s power jack, then plug the power adapter
into an AC power source.
5. Repeat step 2-4 for any other computers you are connecting up.
This completes the single stage installation, and you can turn on the power to the computers.
NOTE: The LCD KVM switch initially links to computer connected to the first CPU port.