2-3
Installation
54-0182 Rev. A1
Antenna Mounting Procedure
1. Remove Antenna Unit from shipping container.
2. Remove and save 8 pan head screws and flat
washers that hold radome to baseplate. Carefully
lift radome straight up until clear of antenna
assembly and set aside.
3. Position Antenna Unit in desired location on the
centerline of the vehicle with baseplate and
mounting plate arrows facing in the same
direction (either forward or backward). The proper
orientation is illustrated in Figure 2-2.
4. While baseplate is in place, mark location(s) on
roof for cable access to permit convenient cable
access to the liquid-tight fittings on the back of the
baseplate.
5. Cut tie-wraps holding Antenna Unit to the
forward shipping restraint.
Figure 2-2
Proper Orientation of
the Antenna Unit
Vehicle
Centerline
The liquid-tight connectors on
TracVision S3 may face either
forward or backward along the
centerline of the vehicle for more
convenient installation.
2 tie-wraps used
to secure LNB arm
Shipping Restraint
Shipping Restraint
Nuts and Washers
Figure 2-3
Forward Shipping Restraint
(Arranged for Shipping)
