Follow these steps to connect the antenna cables.
To access the antennas connectors, you first need
to detach the cable cover. Loosen the six #6-32
captive screws securing the cable cover to the
base (see Figure 21). Then set the cable cover
aside in a safe place.
If you routed the cables through a hole directly
underneath the antenna (see Cut Out the Cable
Access Hole, If Needed on page 9), follow these
steps to attach the second foam seal to the base of
the antenna.
a.
Clean and dry the bottom of the antenna.
b.
Peel off the paper backing from the second
foam seal to expose the adhesive. Align the
foam seal so it is centered on the antenna (see
Figure 22). Then press the foam seal firmly
onto the underside of the antenna.