27
TracNet H30 Installation Guide
Connect the Vessel Phone
Connect the Vessel Phone
Using the supplied RJ-11 cable, connect the analog (not
digital) phone or PABX to the BDU’s “Phone 1” jack.
Figure 47: Connecting the Vessel Phone (Example)
Strain-relief
Once all cables are connected to the BDU, use tie-wraps
to secure them to the strain-relief bracket at the back of
the BDU (see Figure 20 on page 13). Leave enough slack
for easy serviceability.
Summary of Contents for TracNet H30
Page 1: ...Installation Guide TracNet H30...
Page 2: ......
Page 37: ...35 TracNet H30 Installation Guide Wiring Diagram Appendix E Wiring Diagram...
Page 39: ......
