18
Getting to know the machine
Getting to know the machine
This section contains general information on your machine and infor-
mation on:
•
Range of application
•
Proper use
•
Definitions
•
Characteristics
•
Designation of the assemblies, and
•
Technical specifications
Range of applica-
tion of the ma-
chine
The Miniair Nova is a precision seed drill for seeding after seedbed
preparation. It is for normal use in agriculture. Versatile equipment op-
tions allow the seeding of round, calibrated seed. The prerequisite is
always a soil condition that allows cultivation and seeding. The level
of wetness or dryness, for example, can make seeding the soil impos-
sible with some soil types.
Proper use
Any application other than or beyond this, e.g. as a means of trans-
port, for stump pulling or to transfer power to other objects is conside-
red improper use. The manufacturer and dealer are not liable for da-
mage caused by improper use. The risk is borne solely by the user
Definitions
There are different interpretations and definitions for some agronomic
terms. The terms used in this operating manual are defined as follows.
Seeding after ploug-
hing
Seeding after completion of turning the soil with the plough.
Seeding after seed-
bed preparation
Seeding after completion of seedbed preparation or secondary prepa-
ration after turning the soil. The purpose of seedbed preparation is to
prepare the top soil layer for seeding. By working at a constant depth,
clods are crushed, the soil surface levelled and the ground below the
seed deposit is recompacted due to the soil contact required.
Mulch seeding
Seeding after completion of mixing the soil. The soil must be worked
deeper than the required deposit depth.
Direct seeding
Seeding without working the soil. Residue from the previous crop is
chaffed or in a condition that enables direct seeding.
