Kval Acro-HD, Operation And Service Manual, Page: 38 / 64

Powering Up and Powering Down the Acro-HD
2-16
KVAL Acro-HD Operation/Service Manual
Powering Up and Powering Down the Acro-HD
This section describes how to power up and to power down the Acro-HD
Powering up the system includes:
• Applying power to the entire system
• Starting the Control Circuit
Powering down the system includes:
• Shutting down the control power
• Removing power from the entire system
How to Power Up the Acro-HD
1.
Ensure factory air is applied to machine and main air supply is turned on.
2.
Check that all E-Stop buttons are out.
.
3.
Make sure the electrical disconnect
the electrical cabinet is turned to
the ON position.
4.
Pull the
CONTROL TRANSFORMER
switch out to the On position. It
should light up.
5.
Push the green
START MACHINE
button.
6.
All lights on the status light panel on the electrical
box should be illuminated.
Note:
If a status light does not turn on during the power
up process, refer to the
Acro-HD Service Manual
for assistance in identifying the issue.