Adjust for the Length of a Door
2-15
KVAL 777 Operation/Service Manual
Adjust the Stops to Different Door Length
Adjust all the stops by unbolting the stop assemblies and moving to the marked locations.
1.
Lockout Tagout Machine.
See “Lockout Tagout Procedure” on
2.
For the
Right Hand Stop
, unbolt the 4 bolts and move to the
marked location.
3.
For the
Left Hand Stop
, unbolt the 2 bolts and move to the marked location
4.
Secure all bolts.
5.
Reverse Lockout Tagout
6.
Process doors
See photos below for the
stop locations.
Right Hand Stop, align the
rear edge of the plate to the
mark
Left Hand Stop, align the front
edge of the plate to the mark
6’8” Location
6’8” Location
8’0”Location
8’0” Location
Summary of Contents for 777
