0
Owner Manual
American Beauty
Before starting your
American Beauty:
First: Be sure it is plugged into a working outlet of the
proper voltage. This is a standard NEMA 6‐20 outlet,
rated for a maximum of 250 volts and 20 Amps. It is
available at any hardware store.
Note: GFI circuits are NOT compatible with your lathe.
Be sure the Emergency Stop/main power switch is popped
out. Just give it a little twist if it is pressed in and it should
pop out.
Be sure the spindle lock is all the way down – engaging
the spindle lock disconnects the controls. Please note,
the spindle lock might be only part way up – not enough
to lock the spindle, but enough to disconnect the controls.
For safety sake, put the speed dial at lowest setting.
This is a great habit to get into
every time you start your lathe.
Robust Tools, LLC 101 Business ID Barneveld, Wisconsin 53507
Please read the trouble shooting section. Phone: 608‐924‐1133 Email: [email protected]
ROBUST LATHES HAVE BEEN TESTED TO UL STD. 987 and CSA STD. C22.2 No. 105 AND ARE CE COMPLIANT
© Copyright 2020 by Robust Tools, LLC; All Rights Reserved. The information contained herein is subject to change. Robust Tools, LLC
is not responsible for errors or omissions herein or for incidental damages in connection with the furnishing or use of this information.
20200707
Push it all the way down
