KV2 Audio VHD5000, User Manual

Page: 23 / 48

VHD5000 GUI · K-NET
K-NET
Pic 77: After being added to the new group, these amplifiers
turn gray.
If you want to put them back, just select them in right panel
and press the arrow - they will automatically return to the group
where they were, or press ESCAPE button to cancel the creating
of group. All amplifiers in the right panel stay in their previous
groups. To create a new group it must contain at least one
amplifier.
Press DONE to finish.
Pic 78: You can see your new group in the list
of groups. Select VOCAL group to see its amplifiers
in right panel. Pic 79: It might happen that amplifiers in a group
don’t have same settings, for example you put two
amplifiers in a group with different settings. This is
indicated by the NEED SYNC label on the group box.
When you are in OPEN AMP mode, press group box
to open the synchronization window.
Pic 80: Select the amplifier which settings you want to use,
which will then apply its settings to all of the other amplifiers
in the group.
Confirm with SYNCHRONIZE button.
Be careful as this cannot be undone!
21
VHD5000 GUI · K
-NE
T