KV2 Audio VHD5000, User Manual

Page: 15 / 48

VHD5000 GUI · Ethernet
Side menu - NETwork - connection
Ethernet
Set ETHERNET configuration by pressing DHCP/STATIC button (pic 42 - A).
Pic 43
In STATIC mode (Pic 42): set the IP and MASK. When you
change it, a validity indicator appears (Pic 43).
Red frame indicates invalid change, green frame (IP)
indicates acceptable change. When your changes are
marked green, the OK button (C) is enabled. Press it to apply
changes. Reset (B) IP address and mask to the current setting.
DHCP mode: The IP address is set automatically from DHCP
server, push the RENEW ADDRESS button (D) to refresh
connection.
DHCP Status:
"Discovering server",
"Server found" / "No DHCP server found"
"Address accepted" / "Address refused"
Check DHCP Server Address, IP Address and Subnet Mask.
ETHERNET CONNECTED: YES/NO MAC ADDRESS
Speed / Mode - "Half Duplex", "Full
Set RS485 TERMINATOR ON/OFF.
Pic 42
Pic 44
Pic 45
A B C
D
13
VHD5000 GUIT · E
thernet