VHD 3200 AMPLIFIER / CONTROLLER
SPECIFICATIONS
Signal Input
Input Sensitivity
1 Volt Rms at full power
Input Impedance
20kOhm (Balanced)
Main Signal Input Connector
Female XLR
Through Signal Output
Male XLR
Speaker Output
Subwoofer Speaker Connector
Panel-mounted Amphenol EP-4 Female
Required Cable-mounted Connector
Amphenol EP-4 Male
ON / OFF Switch
2-position rocker switch with built-in
thermal breaker for AC Overload and Short
Circuit Protection
Amplifier
Type
High-efficiency, current-enhancing
Switch Mode technology with Active Filter
Rated Continuous Power
1600 Watts
Distortion
<.05% THD
Operating Bandwidth
20Hz - 1kHz
Cooling
Forced Cooling - aluminium heat sink
Two high-capacity fans, mechanically
isolated, electronic speed control
Physical
Height
7.00” (177.8mm)
Width
19.00” (483mm)
Depth
19.5” (495mm)
Weight
88 lbs. (35kg)
Line input Power
AC Connector
Neutrik PowerCon
US
115VAC, 60Hz
US recommended amperage
20 Amps (Each Channel)
EU
230VAC, 50Hz
EU recommended amperage
10 Amps (Each Channel)
5
Summary of Contents for VHD3200
Page 12: ......
