250 VAC
230 VAC
115 VAC
1
2
3
4
5
8
ESP4000 · F
ea
tur
es · Rear panel
ESP4000 · Features · Rear panel
Rear Panel
1) Channel Input Level Adjustment
Each channel of the ESP4000 features an Input Level adjustment potentiometer that allows the user to individually adjust all
four channel's input levels from
∞
through -6dB in the vertical position and up to to 0dB.
2) Main Inputs
These are the input connectors for all four channels with associated 'Through Output' connectors for sending signal to other
devices.
3) PowerCon Power Connectors
The ESP4000 uses one connector per two channels. Both must be connected to operate all four channels of the ESP4000.
Half of the channels will be fully functional if only one is connected. They accept standard PowerCon terminated AC Mains
cables.
4) Fans
The cooling fans operate continuously while the ESP4000 is on. An internal temperature sensor increases the speed of the
fans during high temperature conditions. Air enters through the front grille and exits through the rear. Be sure to allow
adequate air fl ow to the front of the rack in which the ESP4000 is mounted.
5) Main Outputs
Each channel of the ESP4000 is equipped with binding posts and Neutrik Speakon® connectors on the Main Outputs.
The minimum recommended output is 2W.
