ESP4000 · I
mp
or
tan
t S
af
et
y I
nstr
uc
tions
ESP4000 · Important Safety Instructions
Important Safety Instructions
Before using your ESP4000, be sure to carefully read the applicable items of these operating instructions and the
safety suggestions.
1.
Read all product instructions.
2.
Keep printed instructions, do not throw away.
3.
Respect and rewiew all warnings.
4.
Follow all instructions.
5.
Do not use this unit near water, in unprotected out door areas or in rain or wet conditions.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings.
8.
Install in accordance with KV2 Audio's recommended installation instructions.
9.
Do not install near any heat sources such as heat radiators, heat registers, stoves or other apparatus that produce heat.
10.
Do not defeat the safety purpose of the grounding type plug. A grounding type plug has two blades and a third
grounding connector. The third connector is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
11.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles
and the point where they exit from the amplifier. The AC mains plug or appliance coupler shall remain readily
accessible for operation.
12.
Only use accessories specified by KV2 Audio.
13.
The unit is intended for use in a 19" rack. Follow the mounting instructions. When a rack on wheels is use, use caution
when moving the loaded rack to avoid injury from tipping over.
14.
Install the product only with both front and rear supports.
15.
Unplug this amplifier during lightning storms or when unused for long periods of time.
16.
Do not connect a ESP4000's output in parallel or series with any other ESP4000's output. Do not connect the ESP4000
output to any other voltage source, such as a battery, mains source or power supply, regardless of whether the
ESP4000 is turned on or off.
17.
Do not run the output of any ESP4000 back into another channels input.
18.
Refer all servicing to qualified service personnel. Servicing is required when the amplifier has been damaged in any
way, such as when the power-supply cord or plug has been damaged; liquid has been spilled or objects have fallen into
the amplifier; rain or moisture has entered the amplifier; the amplifier has been dropped; or when for undetermined
reasons the amplifier does not operate normally.
19.
Do not remove top or bottom covers. Removal of the cover will expose hazardous voltages. There are no user
serviceable parts inside and removable may void the warranty.
20.
An experienced user shall always supervise this professional audio equipment.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
To prevent fire or electric shock, do not expose this equipment to rain or moisture.