KV2 Audio ESP2000D, User Manual

Page: 15 / 24

ESP2000D · Remote management
Channels
Shows the amplifier control parameters and amplifier diagnostics information.
Control
Changes the amplifier control parameters, Mute (RED = amplifier muted), Input level (-24 to +6 dB), BASS EQ (ON or OFF),
Speaker protection (700, 400, 200W, OFF).
Diagnostics
Shows amplifier diagnostics information.
Mains voltage
Bridge mode
Can be set using amplifier display only, Orange when
activated.
Signal
Green when input signal is present.
Speaker protection
Orange when speaker protection hits.
Temperature
Shows the amplifier channel A & B heat sinks
temperatures.
Output voltage
Shows the amplifier speaker output voltage.
Output current
Shows the amplifier speaker output current.
Calculated impedance
Shows the connected load calculated impedance, it is
important to know that a speaker impedance is not constant
and varies with frequency.
Calculated power
Shows the connected calculated power load, it is important
to know that a speaker impedance is not constant
and varies with frequency.
13
ESP2000D · Remot
e managemen
t