KV2 Audio ESP2000D, User Manual

Page: 13 / 24

ESP2000D · Web-server
ESP2000D Web-server
The ESP2000D web-server is accessible using a standard web browser on PC or mobile device. The appropriate ESP2000D
network address must be set to access web-server. The web-browser device IP address must be set from the same network
range and must be connected into the same network.
IP addresses are assigned to networked devices when they are configured for a specific network. The way that they are
assigned can be static or dynamic.
The ESP2000D network address may be set several ways:
Auto IP
(Default) Automatic Private IP Addressing , is a method of automatically assigning IP addresses to networked devices.
A networked device configured to use Auto IP first makes a request to a DHCP server for an address. If the device does
not receive an IP address, which happens when there is no DHCP server on the network or when the DHCP server is not
responding, the device assigns itself an address. Auto IP addresses always follow this pattern:
169.254.x.y , where x and y
are any two numbers between 0 and 255. Unlike DHCP, Auto IP does not require a router or a separate server to assign
an IP address. The selected IP address is displayed on display - section NET, or can be obtained using the KV2 diagtool
software.
DHCP
Dynamic Host Configuration Protocol. A DHCP server enables network devices to request IP addresses and networking
parameters automatically from the DHCP server, reducing the need for a network administrator or a user to manually assign
IP addresses to all network devices. The assigned IP address is displayed on display - section NET, or can be obtained using
the KV2 diagtool software.
It is important to know that a dynamic IP address can change. If a network device with a dynamic IP address suddenly stops
responding at its IP address, it is possible that it has obtained a new lease and its address has changed.
Static
A static IP address must be manually assigned to a network device. This address is typed by the person who sets up devices
on the network, and it never changes. A static IP address changes when the person who administers the network specifically
changes it.
11
ESP2000D ·
W
eb
-ser
ver