KV2 Audio ESP1000, User Manual

Page: 4 / 19

3
ESP1000 · I
ntr
oduc
tion
ESP1000 · Introduction
Introduction
The ESP1000 is a four channel rack mountable power amplifier specifically designed for optimised performance with KV2 Audio's
ESD Cube / ESD1.10 subwoofer system. The unit contains four separate 250 watt amplifiers, two independent power supplies
(two channels running off each power supply), four signal paths, inputs and outputs as well as limiting and equalization
for given passive loudspeaker / subwoofers. Six independent configurations are selectable and it can be used to power any ESD
units and other ranges of passive loudspeakers.
Whilst this unit is simple to operate, improper use can be dangerous. This is a very highpowered device that can output
high voltages and sizeable currents. Always use safe operating techniques with the ESP1000.
FOR YOUR SAFETY, READ THE IMPORTANT PRECAUTIONS SECTION AS WELL AS THE INPUT, OUTPUT AND POWER
CONNECTION SECTIONS OF THIS MANUAL.
ESP1000 - part number KVV 987 394 (250V)
KVV 987 393 (230V)
KVV 987 392 (115V)
Front Panel:
Rear Panel:
Side Panel:
Application
Primarily designed to drive and control
the ESD CUBE loudspeaker system and ESD
range speakers with superior sound quality.
• Fixed installations
• Portable PA