______________________________________________________________________________________
4
CH18
6.8 The timer of equalize charge mode is able to
changed.
Remove the metal cover of this enclosure and
jump the wire proper position can change the
timer.
6.9 When measuring the output voltage in an open
circuit, user need to parallel a 4.7K
Ω
~10K
Ω
(1W) resistor.
7. TROUBLESHOOTING
8. TROUBLESHOOTING
1. Check the voltage of the main AC source.
2. Check whether main MCCB is tripped.
3. Check whether the output terminal is feed to battery properly.
4. Check whether output is shorted.
No output voltage
5. Check whether reverse battery polarity is connected.
1. Check whether the battery is saturated.
2. Check whether the output terminals are feed to battery properly.
3. Check whether the battery charger is accordant with target battery.
4. Check whether if battery is decayed.
No charge current or the
current is unable battery
properly
5. Check whether the output MCCB is tripped.
※
If these steps above could not make the charger working still, Please contact with KUTAI.
※
Please accept our sincere apology if any modification in performance, specification or appearance is
made without prior notice.
(1) DC Voltmeter for output.
(2) DC Ammeter for output.
(3) Power LED.
(4) Equalize mode LED.
(5) Float mode LED.
(6) Equalize mode setting button.
(7) Output MCCB.
(8) Main power MCCB.
(9) Adjust VR for float charge mode
voltage.
(10) Adjust VR for output current limit.
(11) Adjust VR for equalize charge mode
voltage.
(12) Positive out terminal (red).
(13) Negative out terminal (black).
1
2
3
4
5
6
Figure 3
Figure 2
