___________________________________________________________________________________________
56
ATS-PLC
APPENDIX 02 : Download Start-up Screen
When powering up the ATS-PLC, the system will display a customizable start-up screen. This chapter will provide
you with the step by step instruction on how to setup customizing start-up screen.
Note 1 : The Start-up Screen picture format is limited to
bmp, jpg and png files only with image size 630*390.
The system will proportionally reduce the image size if
image size exceeds the limit.
Note 2 : To download the image from PC to ATS-PLC,
user will need to connect a KCU-01 USB
communication module (optional) to the controller.
Step 1 : Before connecting the ATS-PLC to the PC,
user must first install the “KCU-01 Modules” and
“ATS-PLC Image Transfer Software” software to the
PC. Drivers are supplied in the supplied software disk
or can be downloaded from Kutai Electronics website
Step 2 : Remove all other communication module(s)
leaving only KCU-01 module installed.
Step 3 : Turn on the DC power.
Step 4 : Connect the USB cable to the KCU-01 and
PC.
Step 5
: Execute the “ATS-PLC Image Transfer
Software”.
Step 6
: Click on “Link” and select “Connect” to connect
to the KCU-01 module.
Step 7 : Select the correct COM Port.
Step 8
: Click “Load Image” and select the image
wishes to upload.
KCU-01 USB Module
