___________________________________________________________________________________________
ADVR-2200M
5
ON
ON
F+
F-
E3
P2
P1
E1
E2
CT.
Generator
Stator Wires
T
S
R
N
Set the DIP SW Correctly
Ex
cit
er
AUX. wires
(Harmonic)
A2
A1
VR2
VR1
P4
P3
C2
C1
ADVR-2200M
Figure 5
Auxiliary Winding (AUX.) Connection
+
OUT
1
OUT
2
+
B
B
IVT
S2
S1
E2
S
R
N
T
CT.
Fuse
E1
Ex
cite
r
Stator Wires
Generator
P1
E3
P2
F+
F-
A2
A1
VR2
VR1
Set the DIP SW Correctly
P4
P3
C2
C1
Shunt with IVT wiring diagram
Time
Test
Output
Ready
Test
Batt-Volt
OVLD
ON
Droop
%
ADVR-2200M
ON
ON
Figure 6
ADVR-2200M & IVT-1260 / IVT-2460 Wiring Connection
ATTENTION
1. All AC voltage readings are average value only.
2. Use a remote 500 ohms 1 watt external VR for +/- 5% adjustment range. (keep shorted if not used)
3. Use a remote 1K ohm 1 watt external VR for +/- 10% adjustment range.
4. Sensing Voltage can be set from 220
– 600 Vac Program SW1-1 & 2 correctly.
5. For single phase sensing bridge E2 & E3 and move SW2-1 to OFF.
6. If your PMG is not working you can also power the AVR in shunt using terminals P1 & P2 connected to
the output of the generator as long as
it’s less than 277 Vac.
※
Use only the replacement fuses specified in this user manual.
※
Appearance and specifications of products are subject to change for improvement without prior notice.
