5
9
”
(1
5
0
c
m
)
M
a
x
.
Safety pin
Leg position
clamp
Height adjustment
clamp
Setup Instructions:
Making Connections:
Using with KSS1 (optional) speaker stand
•
Extend the legs of the KSS1 stand to their maximum
extension position and tighten the leg position clamp.
Place the stand on stable, level ground.
•
Using the internal pole, adjust the height of the stand
to a maximum of 59” (150cm). Tighten the height
adjustment clamp.
Note: Always insert the safety
pin into the proper hole before placing the
speaker on the stand.
•
Place speaker cabinet on the stand and tighten the
securing bolt on the speaker cabinet.
Using with an external mixer
•
With the power off on the mixer and the Airplay system, connect an XLR, 1/4” balanced or 1/4”
unbalanced cable to the line output on the external mixer. Connect the other end of the wire to
the combination input jack (
1
) on channel one or the line input jack (
4
) on channel two.
Note: When using the combination input jack (
1
), be sure the pad switch (
2
) is set to the -
6db position.
•
If you are using an audio source, such as a CD player or computer, and want to connect it to
the Airplay system instead of the external mixer, connect the output of the source to the RCA
input jacks (
8
) or the aux line input jack (
9
).
•
If you are using a microphone with a mini (1/8”) plug, you can use the mic in jack (
6
) to
connect to the Airplay system instead of the external mixer.
•
Be sure that the power switch (
C
) is set to the “off” position and then attach the AC cable to the
AC input jack (
D
).
•
Connect all microphones and other instruments to the external mixer.
Using without an external mixer
•
With the power off on the Airplay system, connect your microphone (if using) to the channel
one combination input jack (
1
).
•
If you are using a line level instrument or a preamp output from an amplifier, connect to the
1/4” line input jack (
4
) on channel two or the combination input jack (
1
) on channel one.
Note: When connecting a line level input to channel one, set the pad switch (
2
) to the -6 db
position.
•
If you are using an audio source, such as a CD player or computer, connect the output of the
source to the RCA input jacks (
8
) or the aux line input jack (
9
).
•
If you are using a microphone with a mini (1/8”) plug, you can use the mic in jack (
6
) to
connect to the Airplay system.
•
Be sure that the power switch (
C
) is set to the “off” position and then attach the AC cable to the
AC input jack (
D
).
7
