Kustom airplay AP15A, Owner'S Manual

Page: 10 / 12

20 Hz 50 100 200 500 1K 2K 5K 10K 20K
dBSPL
85
90
95
100
105
110
SPL vs Freq
10
Airplay AP15A
Specifications
Model AP15A 3 Channel 400W Powered Speaker System
350 Watts @ 1% THD
50 Watts @ 1% THD
CH 1 Mic XLR Balanced, Line 1/4" Balanced/Un-balanced
-3dB 54Hz - 16KHz
-10dB 42Hz - 19KHz
-110 dB Mic Input, Rs=150 ohm, 20-20kHz
-60dB Residual Noise, all level controls 0% (minimum)
-55dB Nominal System Noise, all level controls at 50%
+70dB Mic to Amplifier Output (Ch 1 - 3)
+50dB Line to Amplifier Output (Ch 1 - 3)
+50dB Stereo Line to Amplifier Output (Ch 3)
Master Equalization
+15V Mic input (Ch 1)
+5V Mic input (Ch 3)
USA/Canada 120VAC/60Hz, 500W nominal
Europe 230VAC/50Hz, 500W nominal
UK 230VAC/50Hz, 500W nominal
Australia 240VAC/50Hz, 500W nominal
Japan 100VAC/50-60Hz, 500W nominal
mm/kg 690 (Height) x 445 (Width) x 380 (Depth), 29.9
Inches/Pounds 27.2 (Height) x 17.5 (Width) x 15 (Depth), 63.3 lbs
Output Power, Woofer Amp
Total Harmonic Distortion
Line 1/4" Balanced/Un-balanced
Mic & line 1/8" stereo, RCA Stereo. Any combination
of these inputs can be used at once.
CH 2
CH 3
Accepted Inputs
Output Power, Horn Amp
Phantom Power
Actual response can vary based on input.
Less than 0.4%
Hum & Noise
System Gain per Channel
Frequency Response
3 Band, Active
All Measurements made at 1kHz unless noted
Dimensions & Weight
Power Requirements
Note: Kustom does not supply mounting hardware for Airplay™ speakers. For safety purposes, be
sure to utilize professional mounting procedures and materials for these, or any, speaker systems.