background image

3

170 Cherry Avenue

West Sayville, NY 11796

www.kussmaul.com

Ph: 800-346-0857

Fax: 631-567-5826

[email protected]

FEATURES

•  Completely automatic operation, charges battery on demand.

• 

Input voltage, switch selectable, 115 volt or 230 volt.

•  Output voltage regulated, eliminates overcharging battery.

•  Output, current limited to protect charger from overloading.

•  Optional charge indicator.

   

INTRODUCTION

The Euro Charger I -VHO Battery Charger is a compact completely automatic    

charger designed for installation on vehicles with a single 12Volt or 24Volt 

battery system. Voltage is sensed so that the battery system is charged ac

-

cording to its requirements.

The total output of the Euro Charger I -VHO Battery Charger is: 

 091-162-24: 20 Amperes for 24Volt Battery Systems

 091-162-12: 40 Amperes for 12Volt Battery Systems

Construction of the Euro Charger I-VHO is extremely rugged to withstand the 

shock and vibration normally encountered by vehicle mounted equipment. 

The unit operates completely automatically and stops charging the battery 

system when fully charged. There is no trickle charge and therefore no danger 

of overcharging and water boil-off. Any parasitic loads on the battery such 

as radio, lights, etc., are automatically supplied with current by the charger.

3

Summary of Contents for EURO CHARGER I VHO









Reviews: