Engine overheats.
• Clean cooling fins and fan blades.
Engine runs, rammer does not
tamp.
• Inspect clutch for damage. Replace if necessary.
• Broken connecting rod or crankgear.
• Low engine performance. Compression loss.
Engine runs, rammer
operation is erratic.
• Oil/grease on clutch.
• Broken/worn springs.
• Soil buildup on ramming shoe.
• Broken parts in ramming system or crankcase.
• Engine operating speed is too high.
On machines equipped with
the low oil shutoff switch, the
warning light flashes slowly,
the engine starts but shuts off
after 10-12 seconds.
• Engine oil level is low. Add oil to the engine. See
Technical Data
for oil quantity and type.
Problem / Symptom
Reason / Remedy
On machines equipped with
the low oil shutoff switch, the
engine starts and continues to
run but the low oil warning
light stays on continuously.
• Check the switch for proper wire connections.
• Switch is not functioning properly. Replace the
switch.
On machines equipped with
the low oil shutoff switch, the
engine starts and continues to
run, but the low oil warning
light did not flash quickly once.
• Check the switch for proper wire connections and
grounding.
• Switch is not functioning properly. Replace the
switch.
Summary of Contents for PDR80
Page 13: ...3 4 Label Locations Graphic 1 ...
