Technical module
17
Copyright © 08/2008, Küschall AG
K-Series
2.20 Backrest height adjustment
Adjustment of the push handle or backrest telescope
A - Without push handles
Remove the backrest cover.
Locate the spring clips
inside the backrest straps then press them into the tube.
Adjust the telescopic tube to the required height and let the spring clips snap into
the nearest holes.
Replace the backrest cover.
B - With push handles
Remove the backrest cover.
Slide the backrest strap either up or down to locate the fixing bolt
. Remove nut
and bolt from both sides.
Adjust the push handle to the required height then fit the bolts
into the nearest
holes and secure with the nuts.
Replace the backrest cover.
If the required height is not achieved, replace either the push handle, the telescopic
tube or the backrest tube.
2
B
A
1
