Technical module
10
Copyright © 08/2008, Küschall AG
K-Series
2.8
Rear seat height adjustment
Remove the rear wheels and tip the wheelchair, so that it is positioned on its back.
Loosen the front hinge bracket bolt
on both sides of the wheelchair.
If the seat height is adjustable with the existing vertical seat brace
, loosen bolt
and remove bolt
and the horizontal seat brace
.
If a new vertical seat brace is required, remove the existing one as well as the
horizontal seat brace
and loosely attach the new vertical seat brace to the frame
with bolt
.
Move the vertical seat brace along the plate at the rear so that the required holes
correspond.
Insert the horizontal seat brace
and fix it with bolt
.
Remount the rear wheels, turn the wheelchair over and verify the position of the
vertical seat brace
. It should be at perpendicular to the ground as possible.
Tighten bolts
,
and
.
2.9
Front seat height adjustment
Remove the rear wheels and position the wheelchair on its back.
Loosen bolts
and
connecting the vertical seat brace
to the seat module and
the frame respectively, on both sides of the wheelchair.
Replace the front hinge bracket
or fasten it to the other hole on the front frame.
Remount
the rear wheels, turn the wheelchair over and verify the position of the
vertical seat brace
. It should be perpendicular to the ground as possible.
Tighten bolts
and
on the vertical seat brace.
The seat angle is the
difference between
rear seat and front
seat height.
Please note:
Adjustments made to
the front seat height
change the seat angle.
The rear seat height
may need to be ad-
justed accordingly.
1
2
3
4
5
1
3
2
4
