Küschall KSL, Service Manual

Page: 9 / 32

Reconditioning
5 Reconditioning
5.1 Cleaning
IMPORTANT!
– The product does not tolerate cleaning in automatic washing plants, with high-pressure cleaning equipment or
steam.
IMPORTANT!
Dirt, sand and seawater can damage the bearings and steel parts can rust if the surface is damaged.
– Only expose the wheelchair to sand and seawater for short periods and clean it after every trip to the beach.
– If the wheelchair is dirty, wipe off the dirt as soon as possible with a damp cloth and dry it carefully.
1. Remove any installed optional equipment (only optional equipment which does not require tools).
2. Wipe down the individual parts using a cloth or soft brush, ordinary household cleaning agents (pH = 6 - 8) and
warm water.
3. Rinse the parts with warm water.
4. Thoroughly dry the parts with a dry cloth.
Car polish and soft wax can be used on painted metal surfaces to remove abrasions and restore gloss.
Cleaning upholstery
For cleaning upholstery refer to the instructions on the labels of the seat, cushion and backrest cover.
5.2 Disinfection
Information on recommended disinfectants and methods can be found on https://vah-online.de/en/for-users.
1. Wipe down all generally accessible surfaces with a soft cloth and ordinary household disinfectant.
2. Allow the product to air-dry.
5.3 Materials
The components used to manufacture Küschall® wheelchairs consist of following materials:
Frame tubes Aluminum
Backrest tubes Aluminum
Axle tube Carbon Fiber
Seat cover / Backrest cover PA / PE / PVC
Push handles Aluminum / TPE
Clothes guard / Mudguard
Carbon Fiber or Plastic
Castor forks Aluminum
Footrest tube
Aluminum / Titanium
Footplate Carbon Fiber or Plastic
Supporting parts / Attachments Steel / Aluminum
Screws and bolts Steel
All components have either a protective coating or are corrosion resistant.
1659346-A 9