Installing the Armrest
1.
Install the armrest cover
H
to the armrest assembly
if not yet attached.
2.
Insert joint pin
G
of the armrest assembly into the joint
F
until it engages with an audible “click”.
3.
Swivel the armrest assembly downwards into the
armrest holder
E
until the release lever hook
D
engages with an audible “click”.
4.
Pull out the spring bolt lock
B
and insert the bar of
the T-armrest pad
A
into the holder
C
to the required
height.
The T-armrest pad can optionally be inserted 180°
turned.
5.
Release the spring bolt lock and allow the bar of the
T-armrest pad to engage with an audible “click” in the
nearest hole.
Adjusting the Height
1.
Pull out the spring bolt lock
B
and move the armrest
pad
A
to the required height.
2.
Release the spring bolt lock and allow it to engage with
an audible “click” in the nearest hole.
WARNING!
Risk of Injury
Even if the armrests are locking, they are not
designed to carry the weight of the occupied
wheelchair.
– Never use the armrests to lift the wheelchair.
– Do not use the armrests for transportation
when carrying the wheelchair up- or downstairs.
3.8.4 Mudguard
In order to prevent dirt from the wheels spraying upwards,
a removable mudguard can be fitted. The position of the
mudguard can be adjusted. The adjustment must be carried
out by a qualified technician.
1659285-A
19
Summary of Contents for Compact FF
Page 59: ...Notes ...
