Küschall Compact FF User Manual Download Page 52

Page: 52 / 60

Küschall® Compact

9 After Use

9.1 Storage

IMPORTANT!

Risk of damage to the product

– Do not store the product near heat sources.
– Never store other items on top of the

wheelchair.

– Store the wheelchair indoors in a dry

environment.

– Refer to temperature limitation in chapter

11.4

Environmental conditions, page 58

After long-term storage (more than four months) the
wheelchair must be inspected in accordance to chapter

Maintenance, page 48

9.2 Reconditioning

This product is suitable for reuse. To recondition the product
for a new user, carry out the following actions:

•

Inspection

•

Cleaning and disinfection

•

Adaptation to the new user

For detailed information, see

8 Maintenance, page 48

and

the service manual for this product.

Make sure that the user manual is handed over with the
product.

If any damage or malfunction is detected, do not reuse
the product.

9.3 Disposal

Be environmentally responsible and recycle this product
through your recycling facility at its end of life.

Disassemble the product and its components, so the different
materials can be separated and recycled individually.

The disposal and recycling of used products and packaging
must comply with the laws and regulations for waste
handling in each country. Contact your local waste
management company for information.

1659285-A

Summary of Contents for Compact FF





























































Search results

Summary of Contents for Compact FF

Reviews:

Related manuals for Compact FF

Brands by name

Popular brands

Küschall Compact FF, User Manual

Search results

Summary of Contents for Compact FF

Reviews:

Related manuals for Compact FF

Brands by name

Popular brands