Assembly instructions for :-
AP400222 - Prima Modular Shower Stool
Thank you for purchasing this Croydex product. Please follow the assembly and care instructions
to ensure your shower stool is assembled safely and retains its high quality finish.
No tools are required to assemble this product although a blunt instrument may help the
removal of the seat caps.
A hex head key is supplied to re-tighten bolts on the underside of the seat if necessary.
Safety and Care Advice
1. This Shower Stool must only be used on a flat level surface.
2. It must only be used for sitting –
DO NOT STAND ON THE SHOWER STOOL.
3. Ensure all parts are assembled correctly and are secure before use.
Product Assembly Instructions
1. The tubular components are assembled by depressing the spring-loaded buttons at the
ends of the tubes. Care must be taken not to pinch fingers when pressing the spring-
loaded buttons. (See Fig.1)
2. Depress the spring-loaded button at the end of the leg sub-assembly and insert into the
frame on the underside of the seat. Ensure the spring-loaded button engages fully with
the corresponding hole in the tube. (See Fig.2)
Fig.1
Fig.2
3.
To fit the armrests, remove the plastic caps from the seat by releasing the catches
securing them to the underside of the seat moulding (See Fig.3), and discard them as
illustrated in Fig.4.
4. Remove the plastic retaining clips from the ends of the armrest tubes (See Fig.5) and
insert the tube ends into each side of the seat. (See Fig.6) Note the armrests are handed.
Fig.3
Fig.4
Fig.5
5. Rotate the armrests until they are vertical and align the plastic backrest with the tube
ends. Simultaneously depress the spring-loaded buttons on the tube ends and slide
through the backrest moulding. Ensure the backrest is in the correct orientation before
assembly. (See Figs.7 & 8)
6. Locate the ends of the armrests into the corresponding holes in the top of the seat and
push down to clip into position. (See Fig.8)
S&H 014 R04
