16
KÜSCHALL
COMPACT
attract
© Küschall AG, Switzerland | 2016-01
Service Manual
BACKREST
Fitting height adjustable, rear set push handles
Difficulty:
Tools:
Ò
Ã
3, 4, 5
8, 10
The Velcro
®
bands may have to be replaced with narrower ones, as
space is required to secure the holder on the telescopic tube.
Secure the telescopic tube
B
to the rear frame
A
at the required
height.
Press the cover cap
F
onto the end of the telescopic tube.
Push the Velcro
®
bands
C
onto the telescopic tube.
Push the holder
E
onto the telescopic tube and fix in place by
tightening the clamp bolts.
Fit end band
D
onto the telescopic tube and secure with a bolt.
Attach protective cushion.
Fitting angle-adjustable backrest with height-adjustable
push handles
Difficulty:
Tools:
Ò
Ã
3, 4, 5
8, 10
10
Shorter rear frame (variant III) required.
Push the lower joint pin
B
into the rear frame
A
and fix it using
the bolts.
Fit backrest tube
F
onto the upper joint pin
C
using bolts.
Assemble the upper and lower joint pins
C
and
B
and secure
with a bolt
D
.
Set the desired backrest angle and secure in the nearest hole
using a nut and bolt
E
.
Retighten the bolt
D
.
Push the single Velcro
®
band
H
and then the other Velcro
®
bands
I
and end band
J
over the backrest tube
F
.
Push in push handle completely.
Using the clamp bolt
K
fit the height-adjustable push handles
G
through the telescopic tube
F
.
Fit end band
J
onto the telescopic tube
F
with a bolt.
D
à
13 Nm
E
à
13 Nm
