10
© Küschall AG, Switzerland | 2013-01
Service manual
Frame
Attaching the quick release frame to the seat plate
Difficulty:
Tools:
T15,
Ã
5
,
10
Fit the countersunk bolt
C
in the sixth hole of the seat plate
A
with
washer
D
and nut
E
.
Insert spring
B
.
Spray the sleeve
F
with PTFE-Spray.
Insert sleeve
F
such that the slot is parallel to the boreholes in the seat
plate.
Introduce the female coupling
G
into the seat platesuch that the sleeve
F
is inserted inside the coupling.
WARNING!
Danger of accidents and severe injuries as a result of the loo-
sening of the front frame from the seat plate.
▸
Ensure that the bolts
H
are correctly fitted
(tightening torque, bolt locking).
Fit both
bolts
H
with washers
I
and nuts
J
in the second and third
holes.
3
Spray the lever axle
K
and the plastic sliding disk with PTFE-Spray.
Push the distance sleeve
L
over the lever axle
K
.
Guide the lever axle through the borehole
M
into the coupling.
WARNING!
The clamping force of the quick release lever can be reduced
by the unintentional loosening of the nut, meaning that the
lever can no longer be closed.
▸
Ensure that the nut
N
on the lever axle is correctly tightened.
▸
Ensure that the headless bolt
O
is secured with the correct
torque.
Fit the nut
N
onto the lever axle.
Counter the headless bolt
O
in the nut against the lever axle.
4
Attach the warning notice sticker
P
to the cleaned and grease-free
underside of the seat plate in accordance with the position specifications
(mm) in the graphic.
A
B
C
D E
J
H
G
F
I
K
L
M
N
O
60
,0
30,0
P
E
à
4 Nm (high-strength)
J
à
5 Nm (high-strength)
O
à
4 Nm (low-strength)
3
4
