manualshive.com logo in svg

Küschall Advance, Service Manual, Page: 15 / 35

Share
Download
Küschall Advance Service Manual Download Page 15

15

© Küschall AG, Switzerland | 2013-01

Service manual

Footrests

Footrests

The footrest must be selected in accordance with the seat width. A stan-

dard footrest and an angle-adjustable footrest are available. Furthermore, 

there is a choice between a high-mounted footrest and a fold-up footrest.

Possible lower-leg length in relation to the frame and footrest

Frame

Footrests

Mögliche UL hochmontiert 

[mm]

Mögliche UL im Rahmen 

montiert [mm]

75° / 90°

short

Footrest

220 - 340

350 - 420*

medium

220 - 390

400 - 470*

long

220 - 440

450 - 510*

75° / 90°

short

Angle-adjustable 

footplate

220 - 340

350 - 420*

medium

220 - 390

400 - 470*

long

220 - 440

450 - 510*

75° / 90°

short

Fold-up footplate

220 - 300

310 - 420*

medium

220 - 350

360 - 470*

long

220 - 400

410 - 510*

For the 75° frames 10 mm more is possible.

Install / replace footrest

 

and adjust height

Difficulty: 

˜™™

 

Tools: 

Ã

 

3 

 

 

Undo bolt 

Ⓒ

 by approx. five turns.

 

Tap on the bolt 

Ⓒ 

to release the wedge inside.

 

Remove the footrest 

Ⓐ

 from the frame and replace it with a new one.

 

Slide the footrest 

Ⓐ 

into the footrest guidance 

Ⓑ

 to the desired height.

 

Tighten bolt 

Ⓒ

 again.

  Carry out the same setting on both sides.

i

  If the desired lower leg length cannot be achieved, a high-mounted 

footrest must be used, 

 Chap. Footrests, Fitting and adjusting a 

high-mounted footrest. It is possible to install a longer or shorter 

frame.

Ⓒ

 

à

  4 Nm

Summary of Contents for Advance




































Reviews:

No comments