UM_KSL_en_2012_01 | 13.01.2012
31
9.1
Identifying and repairing faults
Fault
Possible cause
Action
The wheelchair not
travelling in a straight line
Incorrect tyre pressure on one rear wheel
Correct tyre pressure (
Section 3
Technical data)
One or more spokes broken
Replace faulty spoke(s) (
specialist dealer)
Spokes tightened unevenly
Tighten loose spokes (
specialist dealer)
The wheelchair tips too
easily
Frame geometry does not meet specifications
Install antitipper (
specialist dealer)
Back angle too great
Replace backrest with smaller back angle
Removable axles cannot be
inserted correctly
Removable axles dirty
Clean removable axles
Removable axles misaligned
Adjust removable axles (
specialist dealer)
The brakes are gripping
poorly or asymmetrically
Incorrect tyre pressure in one or both rear
tyres
Correct tyre pressure (
Section 3
Technical data)
The rolling resistance is very
high
Tyre pressure in rear tyres is too low
Correct tyre pressure (
Section 3
Technical data)
The castors wobble when
moving fast
Too little tension in castor bearing block
Tighten the nut on the bearing block axle slightly
Castor has worn smooth
Change castor (
specialist dealer)
The castor is stiff or stuck
Bearings are dirty or faulty
Clean or replace the bearings (
specialist dealer)