NB. This equipment must be installed
by a competent person.
VR164
Linton Commode
VR166
Linton Commode w/Footrests
VR167
Footrests (Pair)
Weight Limit: 190kg (30 stone)
UU
Do not
UU
exceed the weight limit stated –
doing so could put the user at
UU
risk
UU
.
Linton Mobile Commode & Footrests
Fixing and Maintenance Instructions
1. Assembly
The commode is provided to you packed in cube form. Please examine all components for any visible
damage before use. If you see any damage or suspect a fault, please contact your supplier immediately.
In this case, please do not use your product as it may compromise the safety of the user.
The package (VR164) contains the following components:
•
The main frame with four brake castors attached
•
White commode plastic aperture seat (attached to the main frame)
•
Grey commode seat cover
•
A pair of detachable arms
•
Detachable back
•
One pair of Footrests (VR166 and VR167 only)
Please read the following installation instructions carefully:
1.1
Remove all contents from the box
1.2
Place the assembled base on a level floor
1.3
At the rear of the commode you will see two black threaded wheel nuts; undo the wheel nuts so
that the locking holes are clear
1.4
Place the two back legs into the locating holes on the back edge of the commode frame
1.5
Secure the back by turning the black lock nuts until you feel the nut biting against the back leg.
1.6
Do no over tighten
1.7
Do not use tools as it is only necessary to have the back secured finger tight
1.8
Place the two detachable arms into the four locating holes featured two each side of the
commode
09/11/10
1548
