11
QC
PASS
KUSAM-MECO
TEST CERTIFICATE
AC/DC CLAMP METER
MODEL NO. __________
KM 2009
SERIAL NO. ___________
MUMBAI
DATE: ___________
ISO 9001
REGISTERED
The instrument has been calibrated by using
equipment which has already been calibrated
to standards traceable to national standards.
This Test Certificate warrantees that the
product has been inspected and tested in
accordance with the published specifications
12
IX How to Change Battery
!
Warning! It is dangerous to carry out test when the
battery cover plate is not in its position
Please pay attention to the polarity of battery to avoid
damaging the meter.
Change the low battery in time
If not use the meter for a long time, please remove the
battery for storage.
- +
1) " " symbol means the battery is undercharge and
need to be replaced.
2) Press
POWER
key to shut down the meter; before
opening the battery cover, please confirm the meter
is in off position, and then replace with qualified new
battery; special attention shall be paid to the polarity
of battery; at last, cover battery cover plate.
X) Accessories
Clamp tester
RS 232 Com cable
Software
Battery (6F22 9V)
User Manual
1 pc
1 pc
1 disk
1 pc
1 copy
