3BA00174 • 2014-02-06 • Rev. 5
HR 100 1 / 23
6.
Description of function
6.1.3.2 Heating plate energy level
Parameter [Energy Level IRHP100A]
■
In this level you can set the energy level for a connected Rework heating plate (option).
Press the rotary encoder to open the parameter [Energy Level]
:
■
The setting range is
to
. Turn the rotary encoder clockwise or anti-clockwise,
until the desired value is displayed, e.g.
. Then press the rotary encoder to save the
adjusted value and to exit the parameter [Energy LevelIRHP100A]. The display shows
again.
■
As soon as an energy level ≥ 1 has been set, the heating plate can also be switched on
manually by quickly pressing the rotary encoder twice. During the heating phase, the LED
a
in the display is lit. Press the rotary encoder again to switch off the heating plate. If
an energy level > 5 is set, the heating plate is switched off automatically after 5 minutes.
VAC
RAMP