© Kurth Electronic GmbH, All Rights Reserved
3
The KE2100 may only be used by sufficiently trained and competent
persons.
Safety warnings and cautions must be read and understood before
using the KE2100. All safety instructions must be adhered to during
use.
Circuits must be de-energized and isolated before test connections are
made.
The operator must check the safety of the circuit before starting the
test; appropriate precautions must be taken.
During the tests, hands must be behind the protective devices of the
probes/clamps.
The instrument must not be used if any part is damaged. Test leads and
crocodile clips must be proper, clean and without damaged or cracked
insulation.
The meter is protected from splash water and dust by the front foil, but
it is not waterproof. It only needs to be opened to change the batteries –
otherwise there are no parts inside the instrument that need to be main-
tained or adjusted.
Remove the test cables before removing the battery cover. The battery
cover must be closed during measurements.
The optional BNC adapter may only be used for low voltage systems.
All applicable safety regulations must be followed.
Documentation and software
Current operating instructions and software updates can be found at
www.kurthelectronic.de
in our download area. Under
Service and Sup-
port > Downloads
you will find the corresponding files such as current
firmware and operating instructions for downloading.
