7
A. Water level switch installing plate
B. Water supplying pipe
C. Water charging tank: Approximate 3.5 litters volume
D. Water outlet control valve of water charging tank
E. Water tank for water circulation: Approximate 0.9 litters volume
F. Ice full detecting board: Use to detect the inner cabinet is full of ice or not, and to check the
ice-harvest process is over or not.
G. Water circulation pump
H. Water drain pipe of the water tank
：
When ice-making, this silicone pipe should be clamped in the
slot of the water tank wall; And when draining the water, this pipe should be pulled out and expand
completely.
I. Ice full detector
J. Water level detecting switch
K. Evaporator (ice-making module)
L. Water dividing pipe
：
With eight little holes, water will flow out from these little holes. And if no
water flows out, can be disassembled and cleaned.
3) Operation panel
A
．
LCD display window
1
、
Unit ON or OFF state symbol: When the unit is turned off(standby mode), this symbol
flashes, and when the unit is working, the symbol will keep lighting on.
2
、
Ambient temperature and ice-making countdown time display
3
、
Ice-making setting and Timer setting display
4
、
Error code
：
E1 means that the ambient temperature sensor is faulted
E2 means that ice-making process is abnormal
；
5
、
Light symbol
：
When this symbol displays, the LED light inside the cabinet will be on
；
6
、
Water flowing and water absence symbol: If the arrow of this symbol flashes, means the
water is flowing in to the water tank; And if the whole symbol keeps on, means there is no
enough water to start the ice-making process.
7
、
Ice-full display: When the ice storage cabinet is full of the ice cube, this symbol will
display, and the unit will stop ice-making process.
8
、
Ice making and harvest display
：
When the ice cube symbol keep rotation, means the unit
is making the ice; And if the symbol flashes, means the unit is during the ice harvest process.
9
、
Self-cleaning display.
B
．
“LED light” button: To turn on or turn off the internal LED light;
Note: Keep pressing this button for more than 5 seconds, it is to change the ambient
temperature unit between Fahrenheit degree and Centigrade degree.
C
．“
Timer/Clean
”
button
：
Quickly press this button once, to enter the Timer setting program; And
1
2
3
4
5
6
7
8
9
LIGHT TIMER
CLEAN
ON/OFF
