background image

Use and Control

Before Use

Wait two hours before connecting the appliance
to allow the oil to flow back in the compressor.

Before using the appliance for the first time, wash
the interior and all internal accessories with
lukewarm water and some neutral soap so as to
remove the typical smell of a brand-new product,
then dry thoroughly.

Do not use detergents or abrasive powders,

as these will damage the finish.

Remove safety elements used for transportation.

Insert the plug into the wall socket and turn the
thermostat knob clockwise beyond position «O»
(OFF).

The thermostat control situated inside the fridge
compartment regulates the temperature of the
appliance.

Turn the thermostat control to the required setting.

Starting the appliance

Temperature Control

The following effects are of significance in respect
of the interior temperature:

Ambient temperature

Quantity and temperature of the food stored;

Frequency with which the door is opened and how
long it is left open

the location of the appliance.

The temperature inside the appliance is
automatically adjusted.

Setting “1” = hightest temperature, warmest
setting

Setting “6” = lowest temperature, coldest
setting.

Setting “0” = Off

A medium setting is generally the most suitable.

Internal Parts

Storage shelves

The shelves can be removed for cleaning.

To permit storage of food packages of various
sizes, the shelves can be placed at different
heights.

To remove the internal shelf pull forward until it
can be tipped up or down and removed.

Please do the same in reverse to insert the shelf
at a different height.

The glass shelf above the vegetable drawers
and the bottle shelf should always remain in

position, to ensure correct air circulation.

18

GB

Safety precautions for isobutane

Warning

The refrigerant of the appliance is isobutane
(R600a) that is inflammable and explosive to a
greater extent.

Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obstruction.

Do not use mechanical devices or other means
to accelerate the defrosting process, other than
those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food
storage compartments of the appliance, unless
they are of the type recommended by the
manufacturer.

Summary of Contents for IKE 160-2T














Reviews: